StockCap heatshrink end caps
05 May, 2011 | Supplied by: StockCap
The range of StockCap heatshrink end caps is suitable for use with most common cable types including XLPE, PVC, PILC and rubber as well as jelly-filled and fibre-optic cables.
Tecpro spray nozzle
04 May, 2011 | Supplied by: Tecpro Australia
Tecpro’s unique spray nozzle can be shut off individually to suit different requirements. The European-designed PNR range of nozzles is manufactured from brass for long-lasting wear.
HPM Linea and Legrand Arteor apps
29 April, 2011 | Supplied by: Legrand Australia P/L
The HPM Linea and Legrand Arteor apps give contractors a convenient and easy way to match electrical accessories with clients’ new rooms.
Transgrid delivers new transformer to Wallerawang
27 April, 2011
Transgrid has delivered the first of two new transformers to Wallerawang.
Weidmuller shielded metal Profibus DP connectors
27 April, 2011 | Supplied by: Weidmuller Pty Ltd
Weidmuller has expanded its range of Profibus connectivity products with shielded metal Profibus DP connectors that are suitable for industrial use and in water, wastewater and general factory automation environments.
Helios H4 series solar power connector
26 April, 2011 | Supplied by: Connector-Tech ALS Pty Ltd
The Helios H4 series solar power connector features the Radsok contact, providing the claimed highest industry current rating of 36-60 A.
Brother PT-7100VP portable labelling machine
22 April, 2011 | Supplied by: Brother International (Aust) Pty Ltd
The Brother PT-7100VP is a compact, portable labelling machine that uses the company’s laminated tapes.
Balluff wind energy equipment power supply
18 April, 2011 | Supplied by: Balluff Pty Ltd
The Balluff semi-potted power supply for use in wind energy equipment has an efficiency rating of 93%. It is designed for high shock and vibration loads and a long service life of nearly 20 years with a MTBF of 800,000 h.
StockCap heatshrink end caps
15 April, 2011 | Supplied by: StockCap
The range of StockCap heatshrink end caps is suitable for use with most common cable types including XLPE, PVC, PILC and rubber as well as jelly-filled and fibre-optic cables.
StockCap heatshrink cable breakout boots
14 April, 2011 | Supplied by: StockCap
The StockCap range of heatshrink cable breakout boots is suitable for use with most common low-voltage cable types including XLPE, rubber and PILC cables rated up to 1.1 kV. Sizes include 2-core boots with body/core dimensions 32/8-14/3 mm and 4-core boots of 41/16-14/4, 50/17-17/4 and 70/28-25/8 mm.
ERICO MP1WWM within-wall mounting plate
30 March, 2011 | Supplied by: nVent Australia
The MP1WWM within-wall mounting plate can be used for installing low-voltage cable, phone and data lines on plasterboard or drywall.
ERICO TSGB telescopic screw gun bracket
29 March, 2011 | Supplied by: nVent Australia
The TSGB telescopic screw gun bracket, part of the Caddy line of fixings, fasteners and supports, features a one-piece, break-apart design. It is suitable for lighter-duty applications and makes mounting multiple runs of pipe, conduit or electrical boxes easier. The pilot holes allow precise mounting anywhere between wall studs, not just by the wall stud.
IECI RSM-8Rx series console management switch with remote power reboot
28 March, 2011 | Supplied by: Interworld Electronics and Computer Industries
The RSM-8Rx series console management switch provides secure remote access to RS232 console ports and the ability to power cycle remote IT equipment. Two models are available: RSM-8R4 providing eight RJ45 serial ports and four IEC reboot power outlets, and RSM-8R8 that provides eight RJ45 serial ports and eight reboot power outlets.
Eaton 3S UPS
27 March, 2011 | Supplied by: Eaton Corporation
The 3S UPS is designed for small office and point-of-sale applications. An all-in-one UPS, surge suppressor and power board, it can save up to a claimed 30% of power consumed by idle peripherals. It provides plug-and-play power and surge protection to computers, gaming consoles and audio-video equipment.
Automated Control Engineering SNT8024 switchmode DC power supply
08 March, 2011 | Supplied by: Automated Control Pty Ltd
Automated Control Engineering and FEAS have introduced the SNT8024 switchmode DC power supply, suitable for harsh industrial environments.
