Electrical distribution

igus CAT6A cable

27 September, 2013 | Supplied by: Treotham Automation Pty Ltd

The CAT6A has been developed for a data rate of 10 GB even during permanent movement.


ABB low-voltage MCCs for mining industry

27 September, 2013 | Supplied by: ABB Australia Pty Ltd

ABB's SafeStart range of low-voltage motor control centres (MCCs) improves safety, equipment reliability and ease of maintenance for operators of demountable-type MCCs in the mining and minerals industry.


Phoenix Contact surge protection app

16 September, 2013 | Supplied by: Phoenix Contact Pty Ltd

Phoenix Contact offers a surge protection app for smartphones (available at Google Play and in the App Store). The app represents an easy-to-use tool for electricians that allows them to convince customers of the need to protect their equipment against surges.


Schneider Electric Compact NSX moulded case circuit breakers with extended capacity

16 September, 2013 | Supplied by: Clipsal - by Schneider Electric

Schneider Electric has released an extended breaking capacity for its complete range of Compact NSX moulded case circuit breakers (MCCB), suitable for low-voltage applications spanning 100 to 630 A. Engineered to provide good protection and service continuity for high-demand power applications, the range now offers breaking capacity of 100 kA at 690 V and 200 kA at 440 V.


Dehn + Sohne DEHNvenCI combined lightning current and surge arrester

11 September, 2013 | Supplied by: DEHN + SOHNE GmbH + Co KG

The DEHNvenCI combined lightning current and surge arrester with integrated backup fuse combines maximum system protection and compact dimensions in a single device.The arrester allows space-saving integration of a combined lightning current and surge arrester and is said to meet the protection requirements of modern switchgear installations.


Kabex Australia OSCG cable glands

09 September, 2013 | Supplied by: Kabex Australia Pty Ltd

The OSCG range of IECEx cable glands from Kabex Australia is suitable for use with steel wire armour and/or braided screened cables in hazardous areas.


TE Connectivity AMP Co Plus system inserts

03 September, 2013 | Supplied by: Commscope

TE Connectivity has launched new inserts for the AMP CO Plus system. The system features two distinct components: the inner cable terminating connector and the application insert.


Phoenix Contact Factory Line smart managed switches

02 September, 2013 | Supplied by: Phoenix Contact Pty Ltd

Factory Line smart managed switches are designed for Profinet and EtherNet/IP applications and offer up to 16 ports. The switches come in a 16-port twisted-pair-only version or with 14 twisted pairs and two 100-Base FX fibre-optic ports. The fibre-optic model is available in a multimode and singlemode version.


UNI-T UT243 clamp tester

02 September, 2013 | Supplied by: Power Parameters Pty Ltd

The UNI-T UT243 clamp tester is suitable for conductors to 50 mm diameter and provides a comprehensive suite of parameters for single- and three-phase, 3- and 4-wire power line analysis including active, reactive and apparent power in true rms measurement mode as well as energy in kWh to 9999 kWh.


Megger DET20C ground resistance clamp

28 August, 2013 | Supplied by: TechRentals

Available to rent, the handheld Megger DET20C ground resistance clamp can be used for general earth testing of multigrounded systems (buildings, pylons and RF transmitter sites) as well as to measure leakage current. Test results can be stored in the onboard memory and downloaded to a computer. Fixed-interval measurement logging is also possible.


Emerson Network Power Liebert NX (10-40 kVA) UPS

28 August, 2013 | Supplied by: Vertiv Australia Pty Ltd

Emerson Network Power has launched the Liebert NX (10-40 kVA), a compact and fully integrated uninterruptible power supply (UPS) that is suitable for small to medium businesses.


Kraus & Naimer A25 switch

27 August, 2013 | Supplied by: Kraus & Naimer Pty Ltd

The Kraus & Naimer A25 switch has been designed for applications where available depths behind the mounting plates are limited and the switching programs require a large number of contacts.


Brother International PT-E100VP electronic labeller

27 August, 2013 | Supplied by: Brother International (Aust) Pty Ltd

The PT-E100VP electronic labeller, from Brother International, is designed to help contractors label cables by simply selecting the diameter of a cable or the precise width of a faceplate.


Redstar Equipment Sumo Jumbo electrical distribution boards

26 August, 2013

Redstar Equipment’s Sumo Jumbo electrical distribution boards are designed to provide mine spec electrical distribution capability in a compact, lightweight design. The Australian-designed boards can be run from mains or generator power and can be cascaded or daisy-chained together if required.


Marechal DS2 Decontactor connector

26 August, 2013 | Supplied by: Marechal

The DS2 Decontactor from Marechal is suitable for demanding industrial applications. It has a rated current of 250 A (with wiring according to standard), a maximum voltage of 1000 V and IP ratings of IP55 with the lid closed and IP54 with the plug connected.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd