Clipsal 56 series switchgear
28 August, 2014Clipsal has extended the 56 series range switchgear to include a removable, base-mounted switch, giving easy terminal access and making wiring and maintenance simple.
Redstar Equipment Sumo Jumbo electrical distribution boards
26 August, 2013Redstar Equipment’s Sumo Jumbo electrical distribution boards are designed to provide mine spec electrical distribution capability in a compact, lightweight design. The Australian-designed boards can be run from mains or generator power and can be cascaded or daisy-chained together if required.
NHP Grizz-Bar isolation chassis
17 August, 2012The NHP Grizz-Bar isolation chassis has been designed for data centres, hospitals and other applications that require maximum uptime from their power distribution system.
NHP Concept Express distribution board design service
13 August, 2012NHP Concept Express combines a software tool that enables users to design distribution boards via a website and a manufacturing line that employes a direct connection to the software tool.
Hager B&R’s Performa range panelboards
24 April, 2012Hager B&R’s Performa range of panelboards achieves safety through attention to new design features and increased cabling space. The Add-On-Block pairs effortlessly with any hager three-phase MCB up to 63 A, creating an RCBO combo that requires four poles of space in total.
D&M deploys energy-efficient lighting and electrical systems for regional NSW hotel
30 March, 2012Privately held Australian commercial contractor D&M Electrical Communications deployed energy-efficient electrical systems for the refurbishment of Westside Hotel in Dubbo, New South Wales. This included main supply and installation of switchboard, distribution boards, all lighting, power, emergency systems, data and C-Bus controls.
SF6 gas recycling centre to lower carbon emissions and generate cost savings
12 December, 2011SF6 gas is extensively used in the electrical industry for dielectric insulation and current interruption in circuit breakers, switchgear and other electrical equipment. Using recycled SF6 gas will help reduce carbon emissions and could result in a cost-saving potential of up to 30%.
The power of copper
29 November, 2011Man first came to understand the value of copper around 10,000 BC. The Romans, Greeks, Aztecs and Egyptians were quite innovative in their use of copper and copper-tin alloys such as bronze and brass. The metal was readily accessible, very ductile and malleable, making it relatively easy to smelt. It also had a natural resistance to corrosion. The current extraordinary rate of development in China and India has significantly increased the demand on this resource, driving the cost of copper to record levels. As the lifeblood of all electrical systems, it is essential that designers and engineers are efficient in their use of copper to produce an economical solution without jeopardising the integrity of the electrical supply system.
Adlink Express-LPC compact COM express module
07 July, 2011The Express-LPC in compact form factor measures 95 x 95 mm, and is fully compatible with the type 2 pin-out of the PICMG COM express specification. COM express modules are integrated off-the-shelf building blocks that are ready to plug into custom-made, application-specific carrier boards for embedded and mobile applications.
Ingersoll Rand R-series air compressors
29 June, 2011 byThe R-series 90-160 kW rotary screw air compressors, manufactured by Ingersoll Rand, utilise Progressive Adaptive Control (PAC) to protect the equipment and prevent unnecessary or emergency shutdowns of production lines caused by extreme situations or maintenance oversights. PAC continually monitors key components and operating parameters and adjusts these to prevent unexpected downtime.
Sullair Air-One range of electrical reciprocating compressors
24 June, 2011 byThe Air-One range of electrical reciprocating compressors is suitable for companies that require intermittent compressed air for industrial tools and processes.
GE single module safety switch with twin terminals
07 March, 2011 byThe compact GE single module safety switch with twin terminals at the top and bottom has been added to the range of GE safety switches and RCBOs.
Sprecher + Schuh CA7-97 contactor
15 February, 2011 byThe CA7-97 is a 97 A, 55 kW (AC3) contactor that has been added to the Sprecher + Schuh CA7 range. The contactor is 72 mm wide, the same width as the CA7-60 to 85 A, which reduces panel size.
Clipsal DIN-mounted, 30 mA RCBOs
07 December, 2010 byThe Clipsal DIN-mounted, 30 mA RCBOs are available as single-module devices for users requiring circuit protection but limited for space.
Sprecher + Schuh CSS7 safety relay and CAS7 safety contactor range
07 December, 2010The Sprecher + Schuh CSS7 safety relay and CAS7 safety contactor range features advanced safety and reliability with various contact configurations.