The Westermo DDW-120 high-speed industrial ethernet extender utilises SHDSL transmission technology, allowing existing twisted pair cables to be used to establish a high-speed remote connection between two ethernet networks.
The Moxa EDS-G509 is an industrial ethernet switch that support up to nine gigabit ethernet ports with five fibre-optic ports. It is designed for installation in harsh industrial environments, able to operate in temperature extremes ranging from -40 to 75 °C and supported by 12/24/48 VDC or 24 VAC redundant dual power inputs.
The Schaffner 510 series output filters reduce voltage slew rate (dV/dt) from inverter drives for variable-speed motors. High-voltage slew rates can cause overstressing of long motor drive cables and cause insulation breakdowns in motor windings.
The C65xx series of industrial PCs (IPC) is designed to be installed in control cabinets or in the rear panel of a control or console housing. By integrating the IPC into an existing housing, this compact solution enables flexible push-button configurations and extension options at the front of the console housing.
The rackmount LSW16G and LSW24G unmanaged gigabit ethernet switches are equipped with 16 x 10/100/1000 Mbps and 24 x 10/100/1000 Mbps ports respectively. The switches provide a backbone link to switched workgroup or a server ‘fat-pipe’ link.
The 100BT ethernet gateway series of 10/100 Base-T ethernet interfaces permits ethernet connectivity between Dynalite’s DyNet peer-to-peer communications serial bus network and third-party technologies, such as audiovisual and building automation systems.
The IBC is an intelligent batch controller with an 8-digit 14 mm character height LED display. All functions of the instrument are programmable from the front panel by touch buttons with tactile feedback. Variables are stored in non-volatile memory.