Clipsal 56 series plugs and connectors
12 October, 2012 | Clipsal Australia Pty LtdClipsal’s 56 Series 32, 40 and 50 A size 2 plugs and socket connectors have undergone a design upgrade, to follow the redesign of the 10 to 20 A size 1 plug and socket connectors.
Hioki FT6380 clamp-on earth tester
09 October, 2012 | Power Parameters Pty LtdThe Hioki FT6380 clamp-on earth tester measures grounding wire-earth resistance using dual, super-slim clamp-on technology. The clamp-on system injects accurate testing voltage in ground wires with simultaneous measurement of current and calculation of ground resistance and rejects external magnetic fields, even to 400 A/m field strength.
Clipsal solar products
09 October, 2012 | Clipsal Australia Pty LtdClipsal by Schneider Electric has developed a range of solar products designed for residential and light commercial markets, including single- and three-phase grid-tie inverters, off-grid inveters/chargers for remote applications and solar charge controllers.
Maxon motor ESCON 36/3 servo controller
09 October, 2012 | Maxon Australia Pty LtdThe ESCON 36/3 from maxon motor allows the set-up of drive systems using Hall sensor feedback (no encoder necessary), without waiving 4-quadrant operation capabilities. It is designed for efficient control of brushless DC motors with Hall sensors up to approximately 100 W.
Fluke Ti105 and TiR105 thermal imagers
08 October, 2012 | Fluke Australia Pty LtdThe Fluke Ti105 and TiR105 thermal imagers both offer Fluke IR-Fusion, which captures a visible light image in addition to the infrared thermal image to take the mystery out of IR image analysis.
Eaton 9PX UPS
04 October, 2012 | Eaton Electrical (Australia) Pty LtdThe Eaton 9PX uninterruptible power supply (UPS) is the next generation of energy-efficient 6 to 11 kVA future-proof UPS’s for virtualised environments, where management of rising energy costs and consumption is a consideration.
Clipsal Medium Power Universal Dimmer
04 October, 2012 | Clipsal Australia Pty LtdThe Medium Power Universal Dimmer from Clipsal is rated at 800 W and designed for universal load compatibility. The unit utilises sophisticated dimming technology to provide full control of a wide range of load types, including small motor loads such as ceilings and exhaust fans.
Vibe Lighting LED downlights
04 October, 2012 | Vibe LightingLED downlight lamps from Vibe Lighting provide an alternative to energy-hungry 35 and 50 W halogen MR16 dichroic lamps.
Weidmuller metal marking system
04 October, 2012 | Weidmuller Pty LtdWeidmuller has released a system for creating aluminium and stainless steel markers for use in and around electrical cabinets, as well as to tag cables.
GE LED Snowcone A19 lamp for consumer market
04 October, 2012 | GE LightingGE Lighting has developed an LED lamp tailored to the consumer market - the LED Snowcone A19. Available in a 7 or 10 W version, the company states that the lamps deliver nearly the same output as 40 and 60 W incandescent bulbs.
Omicron CP CU1 Multi-purpose Coupling Unit
03 October, 2012 | TechRentalsThe Omicron CP CU1 Multi-purpose Coupling Unit for the CPC 100 measures line impedances, k-factors, mutual coupling and coupling of power lines into signal cables.
iRoom iPad in-wall docking solution
03 October, 2012 | iRoom Asia PacificThe iRoom iPad in-wall docking solution is designed for residential and commercial installations of the iPad. It has iPad security and access control features, enabling users to control who can remove the iPad.
Philips Smart Panel LED lighting for offices
28 September, 2012 | SignifyPhilips Smart Panel is an LED lighting solution for general office areas, providing energy savings of up to 20% compared with conventional 3 x 14 W T5 fittings, based on one-to-one replacement lighting designs carried out by the company.
Haydon Kerks BGS04 linear rail system
27 September, 2012 | Motion Technologies Pty LtdDesigned specifically for high moment loads, the roll, pitch and yaw moment load capability of the BGS04 allows the system to maintain tight accuracy and repeatability, even in applications requiring significant cantilevered loading.
Yokogawa CL420 clamp-on process meter
27 September, 2012 | Madison TechnologiesThe Yokogawa clamp-on process meter from Madison Test & Measurement is used for measuring control signals and process instrumentation.
