Fluke 28 II Ex DMM digital multimeter for hazardous environments
04 September, 2012 | Fluke Australia Pty LtdThe Fluke 28 II Ex DMM is an intrinsically safe digital multimeter for measurements both inside and outside of hazardous, potentially explosive areas. With multiple measurement capabilities, it eliminates the need to carry multiple meters for different areas and removes the safety problems associated with crossing through an intrinsically safe-required zone with a non-IS instrument.
Thorn Lighting LumExpress LED light fittings
04 September, 2012 | Thorn Lighting Pty LimitedThorn Lighting has added four product ranges (Areapak LED, LED Express, Rhine LED and Shop LED) to its LumExpress LED light fittings.
Philips LED light bulbs
04 September, 2012 | SignifyThe myAmbiance and myVision ranges of Philips LED light bulbs are claimed to be able to save up to 80% energy and can be used in existing light sockets.
Caterpillar Critical Protection Module UPS system
04 September, 2012 | Caterpillar of Australia LtdThe Caterpillar CPM is a UPS system that combines a CAT Flywheel UPS, CAT diesel generator and an Automatic Transfer Switch in a sound-attenuated and factory-tested ISO standard container.
Axis P3384-V/-VE fixed dome network cameras for demanding light conditions
03 September, 2012 | Axis Communications (S) Pte LtdAxis P3384 Network Cameras, available in indoor- and outdoor-ready models, are suitable for installations close to large windows and entrances in buildings, in tunnel passages and other areas with strong variations in light.
Brooks 9 V battery-powered CO EI207 and EI208 Alarms
03 September, 2012 | Brooks AustraliaCO (carbon monoxide) is a particularly insidious gas, as it can’t been seen, tasted or smelled, but it is potentially lethal. The Brooks 9 V battery-powered CO EI207 and EI208 Alarms are suitable for use when domestic gas appliances and unflued gas heaters are in use.
Rotamass LR compact Coriolis flowmeter
03 September, 2012 | Yokogawa Australia Pty LtdDesigned to measure both liquids and gases, the effective turndown of the Rotamass LR Coriolis mass flowmeter is no less than 2000:1 for liquids and 5000:1 for gases.
Schneider Phaseo ABL4 Regulated switchmode power supplies
03 September, 2012 | Clipsal - by Schneider ElectricThe Schneider Electric Phaseo ABL4 range of single- and three-phase power supplies for industrial machines provides reliability of operation with continuous protection against output overload, voltage surges generated on the output through switching inductive loads and against abnormal rises in ambient temperature.
Brooks 600 series smoke and heat alarms
03 September, 2012 | Brooks AustraliaThe latest-generation Brooks 600 series Smoke and Heat alarms employ a number of features to improve detection, early warning and reliability.
Brooks RadioLINK alarm interconnection
31 August, 2012 | Brooks AustraliaRadioLINK provides wireless alarm interconnection using radio signals removing the need for disruptive hard-wired interconnection.
Conxall Data Con-X sealed mini-USB type B connectors
23 August, 2012 | Clarke & Severn Electronic SolutionsConxall has introduced the Data Con-X sealed mini-USB type B connectors that can be used to seal and standardise all data connections.
Wieland-Electric gesis IP+ connector system
21 August, 2012 | DKSH Australia Pty LtdThe gesis IP+ connector system - RST 20i3 and RST20i5 - from Wieland-Electric provides error-free contact up to IP68, even in unfavourable environmental conditions.
Harwin EZ BoardWare SMT spring contacts
20 August, 2012 | Clarke & Severn Electronic SolutionsHarwin EZ BoardWare SMT contacts can be assembled to PCBs and used as grounding or shielding contacts or for general electrical connections between PCBs or similar.
Harwin Datamate connectors with extended walls
20 August, 2012 | Clarke & Severn Electronic SolutionsThe Datamate male and female J-Tek crimps from Harwin are now available with extended rear walls.
NHP Grizz-Bar isolation chassis
17 August, 2012 | NHP Electrical Engineering Products Pty LtdThe NHP Grizz-Bar isolation chassis has been designed for data centres, hospitals and other applications that require maximum uptime from their power distribution system.
