TE Connectivity Quick Termination Technology program
19 November, 2012 | CommscopeThe Quick Termination Technology program from TE Connectivity outlines the connectivity process of structured cabling solutions for new installers and covers all aspects of cable installation, termination, connection, certification and testing.
JetNet 3810Gf/3810f industrial PoE boost switches
15 November, 2012 | Madison TechnologiesJetNet 3810Gf/3810f industrial PoE boost switches are designed with eight fast Ethernet PoE and two gigabit/100 Mbps SFP ports to extend the high and low bandwidth data through fibre uplink connection for flexible distance mobile surveillance applications.
Fluke CNX wireless testing system
15 November, 2012 | Fluke Australia Pty LtdFluke has introduced the CNX Wireless System, a set of test tools that wirelessly connect multiple measurement modules and send simultaneous readings to a master device up to 20 m away. The rugged, customisable tool set lets users choose various measurement modules based on their specific troubleshooting scenario.
Madison Technologies Westermo DDW-142 ethernet extender
15 November, 2012 | Madison TechnologiesThe Westermo DDW-142 from Madison Technologies is a high-speed, compact device that is capable of meeting the increasing data transfer demands within industrial applications. It uses SHDSL technology to establish a high-speed connection between ethernet networks using any existing copper cables.
Vicom Aeroflex 3550 touch-screen radio test system
15 November, 2012 | Vicom Australia Pty LtdThis 3550 portable touch-screen radio test system is now available from Vicom.
PE.fiberoptics ONA600 Optical Network Analyser system
15 November, 2012 | TelecomTest SolutionsThe ONA600 Optical Network Analyser is a versatile tool for characterisation of optical fibres and networks. The system consists of a mainframe with plug-in modules for measurement of chromatic dispersion (CD610), polarisation mode dispersion (PMD610) and spectral attenuation with a range of optical light sources.
PE.fiberoptics Chromos11 chromatic dispersion and PMD measurement system
15 November, 2012 | TelecomTest SolutionsThe PE.fiberoptics Chromos11 chromatic dispersion measurement test set has been designed for use with installed high-capacity DWDM transmission systems, including networks with integral EDFAs.
Yantel Coaxial Temperature Compensation Attenuator Co-TCA Series
14 November, 2012 | Clarke & Severn Electronic SolutionsThe Coaxial Temperature Compensation Attenuator Co-TCA Series from Yantel offers a frequency range of DC to 6 GHz, a power rate of 2 W, impedance of 50 Ω and operating temperature of -55 to +150°C.
Mini-Circuits USB-8SPDT-A18 is a general-purpose, USB-controlled RF switch matrix
13 November, 2012 | Clarke & Severn Electronic SolutionsThe Mini-Circuits USB-8SPDT-A18 is a general-purpose, USB-controlled RF switch matrix containing eight electromechanical SPDT, absorptive fail-safe RF switches for greater efficiency for RF and microwave test set-ups. It is constructed in break-before-make configuration and powered by +24 VDC with a switching time of 25 ms typical.
Mini-Circuits PWR-4RMS power sensor
13 November, 2012 | Clarke & Severn Electronic SolutionsThe Mini-Circuits PWR-4RMS True RMS smart power sensor is a pocket-sized, 12.4 x 4.4 x 2.4 cm, precision test USB HID device (no driver installation required) compatible with 32-/64-bit operating systems. It can turn a Windows or Linux PC into a true RMS power meter.
Harwin Datamate 2 mm connector female version
13 November, 2012 | Clarke & Severn Electronic SolutionsHarwin has released a female version of the Datamate 2 mm connector for aerospace, defence and avionics applications. The reverse-gender, right-angle, hi-rel connector enables boards to be connected in parallel or side by side.
Switchcraft Moulded Cable Inline Sealed Power Jack
13 November, 2012 | Clarke & Severn Electronic SolutionsSwitchcraft has available the Moulded Cable Inline Sealed Power Jack, which is supplied as a custom-moulded assembly in rigid PVC.
Lab Brick RF Switch 10 W range
13 November, 2012 | Clarke & Severn Electronic SolutionsThe Lab Brick RF Switch product range has a 10 W power handling capability and offers reliable, high-isolation, low-power and low-cost solid state switch products in both single pole double throw (SPDT) and single pole four throw (SP4T) configurations.
ABB OTDC DC switch range
09 November, 2012 | ABB Australia Pty LtdABB’s OTDC is specifically designed for direct current (DC) applications, including technically demanding solar photovoltaic (PV) systems.
ODU MAC connector system
07 November, 2012 | Clarke & Severn Electronic SolutionsThe ODU MAC connector system consists of a variety of customisable rugged frames, plastic insulation bodies (modules) with many of insert patterns, and crimpable, removable contacts for high currents (power), low currents (signal), and RF-signals.
