PE.fiberoptics Chromos11 chromatic dispersion and PMD measurement system
15 November, 2012 | TelecomTest SolutionsThe PE.fiberoptics Chromos11 chromatic dispersion measurement test set has been designed for use with installed high-capacity DWDM transmission systems, including networks with integral EDFAs.
PE.fiberoptics ONA600 Optical Network Analyser system
15 November, 2012 | TelecomTest SolutionsThe ONA600 Optical Network Analyser is a versatile tool for characterisation of optical fibres and networks. The system consists of a mainframe with plug-in modules for measurement of chromatic dispersion (CD610), polarisation mode dispersion (PMD610) and spectral attenuation with a range of optical light sources.
Yantel Coaxial Temperature Compensation Attenuator Co-TCA Series
14 November, 2012 | Clarke & Severn Electronic SolutionsThe Coaxial Temperature Compensation Attenuator Co-TCA Series from Yantel offers a frequency range of DC to 6 GHz, a power rate of 2 W, impedance of 50 Ω and operating temperature of -55 to +150°C.
Harwin Datamate 2 mm connector female version
13 November, 2012 | Clarke & Severn Electronic SolutionsHarwin has released a female version of the Datamate 2 mm connector for aerospace, defence and avionics applications. The reverse-gender, right-angle, hi-rel connector enables boards to be connected in parallel or side by side.
Lab Brick RF Switch 10 W range
13 November, 2012 | Clarke & Severn Electronic SolutionsThe Lab Brick RF Switch product range has a 10 W power handling capability and offers reliable, high-isolation, low-power and low-cost solid state switch products in both single pole double throw (SPDT) and single pole four throw (SP4T) configurations.
Switchcraft Moulded Cable Inline Sealed Power Jack
13 November, 2012 | Clarke & Severn Electronic SolutionsSwitchcraft has available the Moulded Cable Inline Sealed Power Jack, which is supplied as a custom-moulded assembly in rigid PVC.
Mini-Circuits PWR-4RMS power sensor
13 November, 2012 | Clarke & Severn Electronic SolutionsThe Mini-Circuits PWR-4RMS True RMS smart power sensor is a pocket-sized, 12.4 x 4.4 x 2.4 cm, precision test USB HID device (no driver installation required) compatible with 32-/64-bit operating systems. It can turn a Windows or Linux PC into a true RMS power meter.
Mini-Circuits USB-8SPDT-A18 is a general-purpose, USB-controlled RF switch matrix
13 November, 2012 | Clarke & Severn Electronic SolutionsThe Mini-Circuits USB-8SPDT-A18 is a general-purpose, USB-controlled RF switch matrix containing eight electromechanical SPDT, absorptive fail-safe RF switches for greater efficiency for RF and microwave test set-ups. It is constructed in break-before-make configuration and powered by +24 VDC with a switching time of 25 ms typical.
ABB OTDC DC switch range
09 November, 2012 | ABB Australia Pty LtdABB’s OTDC is specifically designed for direct current (DC) applications, including technically demanding solar photovoltaic (PV) systems.
ODU MAC connector system
07 November, 2012 | Clarke & Severn Electronic SolutionsThe ODU MAC connector system consists of a variety of customisable rugged frames, plastic insulation bodies (modules) with many of insert patterns, and crimpable, removable contacts for high currents (power), low currents (signal), and RF-signals.
Interworld Electronics Enviromux-SEMS-2D Advanced Server Environment Monitoring system
07 November, 2012 | Interworld Electronics and Computer IndustriesInterworld Electronics has released the Enviromux-SEMS-2D Advanced Server Environment Monitoring system. The system uses sensors to monitor critical server room environmental and security conditions.
LevelOne industrial ethernet
06 November, 2012 | WES AustralasiaGerman-based networking specialist LevelOne has launched the Infinity range of industrial-standard networking solutions, which will target large industrial enterprises including mines, assembly lines, drilling rigs and electrical power stations.
Westek Vitrek 4700 high-voltage meter
05 November, 2012 | Westek Electronics Pty LtdThe Vitrek 4700 6-digit precision high-voltage meter is suitable for measurements to 10 kV rms, and by means of the Vitrek HVL range of precision attenuators, can be extended to measure to 35, 70 and 100 kV rms.
Swift cable hooks and retainers
05 November, 2012 | SWIFT Metal Services Pty LtdSwift Metal Services have expanded their range to include the fixed cable and hose retainer. Developed to allow for multiple mounting positions including hooked or bolted configurations, the retainer is suitable for large diameter, heavy hoses cable and pneumatic lines on building sites, energy infrastructure, mines and machinery workshops.
Westek Teseq EMC testing CDN network
05 November, 2012 | Westek Electronics Pty LtdThe Teseq coupling/decoupling network (CDN) model HSS-2 is designed for surge testing of balanced unshielded wire pairs. Examples include ethernet 1-, 2- and 4-pair communication buses and coupling is achieved via a 40 Ω resistive impedance in series with capacitive coupling elements.
