DEWESoft KRYPTON ONE high-voltage and high-isolation DAQ modules
DEWESoft KRYPTON ONE high-voltage and high-isolation DAQ instruments are rugged, small and fully distributable 1-channel data acquisition modules.
They are suitable for field measurements in any environment. The small size of the modules allows them to fit in tight places, and they can be placed close to the sensors.
The latest modules made for high-voltage and thermocouple temperature measurements with high isolation are KRYPTONi-1xHV and KRYPTONi-1xTH-HV. Both provide safety at high voltages with an overvoltage category CATII 1000 V.
The KRYPTONi-1xHV module is designed for high-voltage measurements with a single input range of ±1000 V. The acquisition is based on 24-bit SAR ADC with a sampling rate of up to 40 kS/s and an additional anti-aliasing filter. The input connector is a 4 mm safety banana jack.
The KRYPTONi-1xTH-HV module is an isolated single thermocouple module designed for temperature measurements at high voltages. It supports K-type thermocouple. Temperature is acquired by using a 24-bit delta-sigma ADC with the sampling rate up to 100 S/s. Cold junction compensation is provided by a Pt1000 sensing element. The input connector, LEMO Redel 2P series, is designed in plastic to enable sufficient isolation and clearances.
The product brings data acquisition systems closer to the sensor, which reduces the cost of the sensor cabling and chances of wiring errors, and substantially improves the signal quality.
Phone: 07 3868 4255
The ICP DAS PMD Series industrial IoT power meter concentrator is equipped with a 7″ and...
With typical temperature-reading accuracy of 0.25°C and low operating and standby current,...
Megger's VLF Sine 62 kV with integrated tan delta is a compact, robust and portable...