Universal power alert

Friday, 01 August, 2008 | Supplied by: Dwyer Omega (Aust) Pty Ltd


The UPA-130 universal power alert is designed to reduce the risk of electrical arc flash by pre-verifying the electrical isolation from the outside of a control panel.

The device is hard wired to the circuit breaker or main disconnect and flashes whenever voltage is present. It is engineered with redundant circuitry, which allows it to be powered by the same voltage that it indicates.

The 8-detector device visually alerts to the presence of any dangerous AC or DC stored energy potentials occurring between any combinations of the four input lines (L1, L2, L3, GND).

The device features an IP66-rated housing and -20 to 55°C operating temperature range, and can fit into a standard 30 mm knockout.

 

Online: www.dwyer-inst.com.au
Phone: 02 4272 2055
Related Products

Belden RS485 AWG18 cables

Belden's EN-IEC-rated, low smoke zero halogen (LSZH) RS485 AWG18 cables are designed to...

Remote Control NOJA Power VISI-SWITCH

NOJA Power's VISI-SWITCH, a solid dielectric insulated load break switch with an integrated...

Belden GREYHOUND2000 Standard Ethernet Switch

The ruggedised 19″ switch is designed to be future-ready and to evolve as power and...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd