HARTING M12 circular power connectors

Friday, 16 November, 2018 | Supplied by: HARTING Pty Ltd



The HARTING M12 power connector has been released in the IEC 61076-2-111 standard K-coding for use with power up to 630 V and 7 kW. In order to offer the widely used M12 form factor to device manufacturers for voltage supply, HARTING will supply the K-coding with 7 kW at 630 V and 16 A, allowing the integrated transmission of data, signals and power. The logical consequence for housing manufacturers will be simplified planning and cost savings.

With power of this magnitude in a compact M12 housing, particular attention must be paid to clearance and creepage distances to protect users properly. This is accomplished with a PE contact attached to the housing which is configured as a preleading pin in the mating face in order to bleed off voltage and conduct away flashovers on the housing or between contacts.

With the high voltages, the PCB socket must be protected from flashover on the contact side. To this end, all the hold-downs are separated from each other with an insulator. K-coded cable is available in a crimp version. The connection will be secured with the familiar screw fitting typical of the M12 design. There will also be a PushPull variant that clicks audibly into place.

Online: www.harting.com.au
Phone: 0011 852 2941 5521
Related Products

MORNSUN R3 series dual isolated regulated output DC/DC converters

MORNSUN has added four series of DC converters, all with dual isolated regulated outputs, to the...

IPD EXT56 switchboard enclosures

The IPD EXT56 switchboard enclosure system is designed, tested and certified for outdoor...

IPD Evolution fully customisable distribution boards

The IPD Evolution distribution boards are suitable for inside installations, as well as outdoor...


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd