Hager Electro domestic meter boxes range

The Hager Electro range of domestic meter boxes is designed to conform to relevant state regulatory requirements for Qld, NSW/ACT and Vic. The VYMBQ enclosure for Qld complies with AS/3012, suitable for use as a temporary supply, and comes with the clear service link prefitted to the panel. The VYMBQ-P is a meter-only enclosure (no DIN section).

The products are 276 mm deep (75 mm behind panel), made with galvanised-steel, powder-coated RAL, and feature strong 1.6 mm steel hinges, a flush door opening mechanism and full UV stable cable entry cover. They also contain a patented cable retainer, a door tab and gravity door catch, and a knockout for a padlock tab.

There are two enclosures available for NSW/ACT — the VYMB66-U (undrilled) and VYMB66-D (predrilled) — while the VYMBNSW is available in NSW only. The VYMB66-U and VYMB66-D enclosures are 600 x 600 mm in size, are made with galvanised steel and come with a GD10T and three padlock locking points on the door. The VYMBNSW, by comparison, is a 24-pole DIN enclosure with a black panel and consumer N and E links. It is 276 mm deep (75 mm behind panel) and contains an earth stud and a padlock kit for the door.

The VYMBV and VYMBV-P enclosures for Vic can be used as a temporary supply and comes with a meter neutral link and fuse holder prefitted to the panel. The VYMBV-P is a meter-only enclosure (no DIN section). Both have similar features to the Qld meters but also contain rear Z rails for mounting on existing market poles, a left-side consumer duct and 100 A link set with RCD links.