Schneider Electric PowerLogic PM5350 power meter
21 March, 2012Schneider Electric has added the PowerLogic PM5350 power meter to its range of meters. The meter has a comprehensive measurement package, language customisation, tamper-resistant revenue seals and alarm capabilities.
Schneider Electric Micrologic E control unit
16 November, 2011 byThe Micrologic E control unit features the same protection functions and ‘ammeter’ current measurement capabilities as the Micrologic A control unit, but the new unit adds energy measurement for a low incremental cost. This capability enables energy metering at key points throughout an electrical distribution system, supporting efforts to reduce energy consumption, energy-related costs and greenhouse gas emissions.
HV Diagnostics HVA TD60 portable tan delta measurement system
27 July, 2011 byAvailable to rent, the HV Diagnostics HVA TD60 portable tan delta measurement system determines the power factor of cables, transformers, capacitors, rotating machines and other switchgear, allowing detection of insulation defects prior to failure in service.
Yamasaki TP01 power meter
20 July, 2011 byThe Yamasaki TP01 power meter is a multifunctional device that has been specifically designed for the installation, construction and maintenance of fibre-optic networks.
Westek Prodigit 3340F benchtop electronic load centres
12 July, 2011 byThe Prodigit 3340F benchtop electronic load centres are suitable for duties including the testing of DC LED drivers. They are also suited to the testing of SEPIC, SMPS and PWM power supplies. Fast response dimming tests can be conducted for LED drivers, and constant current, constant voltage, constant resistance and constant power testing protocols are also available. In addition, LED voltage-current characteristics can be simulated.
Yokogawa WT1800 precision power analyser
07 July, 2011The Yokogawa WT1800 precision power analyser is the latest addition to the company’s range of digital power measuring instruments.
SATEC PM175 power quality analyser
01 February, 2011 bySATEC’s PM175 power quality analyser monitors power quality compliance to the EN50160 standard, flicker to the IEC61000-4-15 standard and harmonics to the IEC61000-4-7 standard.
Fluke ScopeMeter 190 series II 4-channel portable scope
20 January, 2011The ScopeMeter 190 series II, the claimed first 4-channel portable scope safety rated to CAT III 1000 V/CAT IV 600 V, combines performance, ruggedness and portability.
CHK PM35 power quality analyser/logger
14 January, 2011Available to rent, the CHK PM35 power quality analyser/logger is a portable power logger and disturbance analyser, supporting harmonic analysis as well as flicker and imbalance monitoring.
CHK PM35 power quality analyser/logger
10 January, 2011Available to rent, the CHK PM35 power quality analyser/logger is a portable power logger and disturbance analyser, supporting harmonic analysis as well as flicker and imbalance monitoring.
Dranetz-BMI Power Xplorer PX5 power monitor
21 December, 2010 byAvailable to rent, the Dranetz-BMI Power Xplorer PX5 accurately captures low-medium-high frequency transients through peak, waveshape, rms duration and adaptive high-speed sampling.
Graphtec GL820 multichannel data logger
07 December, 2010 byThe Graphtec GL820 midi logger features 20 analog input channels, which can be expanded up to 200 channels.
SATEC BFM136 branch feeder monitor multifunction power meter series
11 November, 2010 byThe BFM136 branch feeder monitor multifunction power meter series has metering capabilities for up to 36 current circuits within one device.
SATEC PM130 Plus power meter series
14 September, 2010 byThe PM130 Plus power meter is designed as a replacement for analog instruments, eliminating the need for selector switches, while allowing simultaneous viewing of all phases at once.
SATEC PM130 Plus analog output expansion module for PM130 Plus
14 September, 2010The PM130 Plus analog output expansion module for the PM130 Plus power meter provides four optically isolated analog outputs with an internal power supply.
