APS Industrial is now the sole distributor of KATO switching solutions in Australia thanks to a new agreement.
The CBI Electric SE4 3 Phase 3 pole RCBO has recently been released.
SMART Panelboards sense and communicate energy consumption and switchgear health analytics which share information via a variety of network protocols, including MODBUS RTU/TCP, BACnet And EtherNet IP.
ABB NeoGear low-voltage switchgear has laminated bus plate technology combined with digital capabilities.
Selecting and installing a suitable safety switch for equipment on a circuit is the responsibility of electrical contractors.
The MSP40 modular managed switch by Hirschmann is available with 10 Gb uplinks via its newly designed 10GE module.
The Iconic Styl range from Clipsal by Schneider Electric allows users to safely change the look of switches and sockets by swapping out the skin.
The ASCO Enystar insulated enclosure automatic transfer switch consists of an intelligent controller and a modular load break switch, which automatically transfers the load to the emergency power source when it detects the normal power source under/over voltage, under/over frequency or phase loss.
Finnish switch manufacturer Katko and US-based Grace Engineered Products have both appointed APS Industrial as a national distributor.
The first truly all-in-one automatic transfer switch will bring real benefits to critical power applications.
Hager's Matt Black silhouette range features a clean and modern design.
The Allen-Bradley Guardmaster Lifeline 5 cable-pull switch, from Rockwell Automation, offers an electronic rope-monitoring system to compensate for thermal expansion and cable sag.
The latest range of Clipsal Iconic products will provide new solutions that enhance functionality through innovative connectivity and added convenience.
Hager's modular 63 A manual Changeover Switches have a three stable position (I-O-II) allowing users to control two power supply sources.
ABB DC switch-disconnectors for 16–32 amperes have various DC voltage ratings with the same footprint area. The switches are specifically designed for DC use.