Mean Well LPF-25 Series Constant Current LED Driver
03 October, 2018Mean Well's LPF-25 series is a 25 W AC/DC LED driver featuring the dual modes of constant voltage and constant current output.
Single- versus three-pole circuit breakers
26 September, 2018It's not a new concept to use a three-pole circuit breaker for protecting three single-phase loads in order to save space and costs.
Heritage building beats energy shortfall with batteries
29 August, 2018After Williams Burton Leopardi bought the dilapidated Darling Building in Adelaide, the firm learned that the peak energy demand for the renovated building would be more than what the local power grid could supply.
APT-TH Series power transducers
03 August, 2018The APT-TH Series Power Transducers monitor watt consumption of three-phase loads.
Goal Zero Lithium Yeti range portable power stations
19 July, 2018The Goal Zero Lithium Yeti 400 is a compact, lightweight portable power station with a 400 Wh capacity.
Managing congestion and losses
17 July, 2018 by Donald VaughanThe nature of power flows around the grid is changing rapidly, with a lot of new generation being built on the edges or middle of the transmission system.
APC Smart-UPS On-Line lithium-ion 1000 and 1500 VA 230 V UPS
10 July, 2018The APC Smart-UPS On-Line lithium-ion 1000 and 1500 VA 230 V UPS has lithium-ion (Li-ion) batteries.
Demand management to defer 330 kV cable construction investment
06 July, 2018NSW transmission operator TransGrid has opened a tender process to procure at least 40 MW of demand management solutions in Sydney's CBD.
ABB to upgrade NZ HVDC link
05 July, 2018Transpower New Zealand has appointed ABB to upgrade the high-voltage direct current (HVDC) link which interconnects the transmission grids of the North and South Islands.
Schneider Electric Gutor PXC industrial UPS
04 July, 2018The Schneider Electric Gutor PXC is a standardised fully industrial UPS for harsh environments.
ABB DS203NC residual current circuit breakers
03 July, 2018The ABB DS203NC RCBO (residual current circuit breakers with overcurrent protection) is totally integrated into the modular System pro M compact range and is a suitable response to the request for protective equipment that meets the different types of circuits of the modern three-phase systems.
Relpol MR-EI1W1P single-phase current monitoring relay
02 July, 2018The Relpol MR-EI1W1P single-phase current monitoring relay is suitable for monitoring the load of motors and other critical equipment.
Airborne LiDAR to survey Qld electricity network
29 June, 2018Powerlink will use aerial survey technology to undertake an engineering assessment of its Northern and Central transmission network.
Schneider Electric Masterpact MTZ circuit breakers
25 June, 2018The Schneider Electric Masterpact MTZ is a high-power, low-voltage air circuit breaker with certified embedded Class 1 energy metering.
ABB F200 B RCDs
20 June, 2018The ABB F200 B RCDs assist in detecting different waveforms of residual fault currents and operate when the electrical system has a high leakage current to ground.
