Clipsal has added new products to its Iconic range of switches, sockets and smart devices.
The ICP DAS Power Monitor & Management Solution (PMMS) consists of the Smart Power Meter and the Power Meter Concentrator.
The SW18 Series 10 A double pole auto-switched outlet from CMS Electracom integrates soft wiring couplers into the moulding. The connectors, complete with moulded latches, comply to AS/NZ61535.1:2003 and IP4X, so there is no requirement to use safety end caps or tool-only removable connectors.
Legrand has secured the exclusive Australian and New Zealand distribution rights for a track-based power system, Mainline. It’s a busbar system that once connected to a power supply creates a circuit around a room, allowing access to power at any point along its length.
The Clipsal 450 VC mounting block for corrugated wall structures adapts the company’s Weathershield GPOs and typical 84 mm switches and sockets directly onto vertical corrugated wall cladding.
The Kaysan Office/Workstation Power & Data Hub is a centralised facility that provides power, data and phone interconnections for use in office environments or wherever multiple services are required to be deployed for users.
Rotating, spring-loaded safety covers feature on HPM Extra Safe power points and remain firmly closed when not in use.
The Powersafe portable power distribution boards provide users with the safety afforded by residual current device (RCD) miniature circuit breakers (MCBs) that are fitted in the distribution boards, intended for use on worksites.
The 37/2 series of clear polycarbonate double plug bases provides increased visibility of the terminated electrical wiring to check for faults more effectively.
The Linea Soft-Touch cover plates are a series of coloured fascias that can be snapped onto the Linea GPOs and switch plates, maintaining their low 4 mm thick profile.
HPM Legrand has set up a new national distribution centre as a centralised location from which to distribute products across Australia.
The PT8282 is a 2 m long power board that contains 10 mains outlets that are spaced 200 mm apart to enable devices, including plug packs and chargers, to be connected to mains supply.
The Industrial Strength Options (ISO) range of IP66-rated plugs and sockets is suitable for industrial, commercial and domestic single- and three-phase applications.
The PT1199SS ‘Power on a Chain’ power board is designed to provide electrical power to work areas via overhead means, removing the hazards of tripping or electrocution from electrical leads strewn across floors.
The PT3735 outdoor weatherproof power board is designed to provide access to 240 VAC power in outdoor applications such as water pumps and power tools.