Light fittings for hazardous areas
18 September, 2018 | Control Logic Pty LtdThe R.STAHL 6036 series LED-based tubular light fittings can be used in Ex zones 1/21 and 2/22 and provide an alternative to typical linear luminaires.
IPD Evolution fully customisable distribution boards
10 September, 2018 | IPD Group LimitedThe IPD Evolution distribution boards are suitable for inside installations, as well as outdoor with IP ratings up to IP66 to tolerate harsh environmental conditions.
ABB i-bus KNX DALI gateway with emergency lighting function
01 September, 2018 | ABB Australia Pty LtdThe ABB i-bus KNX DALI Gateway with emergency lighting function combines modern flexible lighting control in intelligent building control systems with DALI emergency lighting.
Prysmian Fire Alarm cables
01 September, 2018 | Prysmian Australia PTY LTDPrysmian Fire Alarm cables are designed to connect each piece of hardware and transfer every signal.
mySmart MY-PA08 entry-level sensor series
01 September, 2018 | mySmartThe mySmart MY-PA08 sensor series provides versatile and easy-to-install entry level sensors.
Trio Flex slice EtherCAT device
31 August, 2018 | Motion Technologies Pty LtdThe Trio Flex slice series of add-ons allow simple extension of an existing or new EtherCAT network.
Panduit VeriSafe Absence of Voltage Tester
20 August, 2018 | Panduit International LtdThe Panduit VeriSafe Absence of Voltage Tester is designed to improve worker productivity and safety.
Vertiv Liebert EXS UPS
20 August, 2018 | Vertiv Australia Pty LtdThe Vertiv Liebert EXS is a compact, monolithic, transformer-free uninterruptable power source (UPS) that provides high density and maximum active power of up to 40°C.
APT-TH Series power transducers
03 August, 2018 | Veederline Pty LtdThe APT-TH Series Power Transducers monitor watt consumption of three-phase loads.
ABB DALI-enabled emergency lights
03 August, 2018 | ABB Australia Pty LtdABB's latest range of exit signs, downlights, anti-panic and escape lighting is designed to work with the open-source DALI (Digital Addressable Lighting Interface) connectivity protocol.
Megger DLRO 600 Digital Micro-ohmmeter
02 August, 2018 | TechRentalsThe Megger DLRO 600 Digital Micro-ohmmeter measures resistance between 0.1 μΩ and 1 Ω, and provides test currents from 10 to 600 A subject to the load resistance and supply voltage.
Anritsu Transport Test for 1G, 10G and 100G Networks
01 August, 2018 | Anritsu Pty LtdAnritsu has released a 100G Multi-rate Module for its Network Master Pro MT1000A all-in-one tester, supporting interface rates from 10 Mbps to 100 Gbps, and technologies including Ethernet, Optical Transport Networks (OTN), SDH/SONET, Fibre Channel and CPRI/OBSAI.
VIAVI Solutions SmartClass Fiber MPOLx optical loss test set
01 August, 2018 | TMG Test EquipmentThe VIAVI Solutions SmartClass Fiber MPOLx is an optical loss test set that can perform all the test requirements for Tier 1 (Basic) certification using MPO fibre connectivity.
Schneider Electric Easy UPS 3S
01 August, 2018 | Schneider Electric IT AustraliaThe Schneider Electric Easy UPS 3S is an easy-to-install, easy-to-use and easy-to-service 10–40 kVA 3-phase UPS suitable for small and medium businesses.
FLIR T640 Thermal Imaging Camera
01 August, 2018 | TechRentalsThe FLIR T640 Thermal Imaging Camera delivers high-performance thermal imaging with a 5 MP visual camera, large 4.3″ touchscreen LCD display and with autofocus.
