The Fluke LinkIQ Cable+Network tester combines switch diagnostics with cable measurement technology. The product provides simple pass/fail test reports using Fluke’s LinkWare software. It can also verify the performance of switches, including those that provide Power over Ethernet.
The LinkIQ is based on a single-test approach that automatically provides the appropriate measurements based on what’s at the other end of the cable. For an open cable, it shows the length and pairing. If it’s terminated with the supplied remote, the test result shows the maximum data rate the cable can support — up to 10 Gbps. If the cable is connected to a switch port, LinkIQ will show the name of the switch plus the port name, speed and duplex. If PoE is advertised, it will display the power and class (up to 90 W or Class 8) and then load the switch to verify the power can be delivered.
Phone: 02 8850 3333
Siemens and Reinhausen solid-state transformer for AI data centres
AI data centres create an increased need for medium-voltage connection, power density, efficiency...
Vaisala Indigo Supervisor for data centres
The Vaisala Indigo Supervisor is designed to simplify environmental monitoring in data centres.
BDC and Morong Electric PowerCore 5.0 module for AI data centres
PowerCore 5.0 is a fully prefabricated power module designed for high-density AI data centres.
