Wieland Electric Wipos PB1 power supply series
02 December, 2010 | Supplied by: Treotham Automation Pty Ltd
The Wieland Electric Wipos PB1 power supply series is suitable for electrical installations in various special-purpose and industrial buildings, where cabling is laid in suspended ceilings, in intermediate floors or in the dado trunking. Decentralised installation is often carried out at the same time, ie, the components for specific switching or automation tasks are also built into the ceiling, floor or trunking.
Turck h-style (3-branch) and H-style (4-branch) M16 tees
08 November, 2010 | Supplied by: Turck Australia Pty Ltd
The h-style (3-branch) and H-style (4-branch) M16 tees are designed to simplify and speed cable-tray wiring in comparison to hard-wired cable-tray installations. The tees are available in various configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.
Hammond Electronics 1550Z die-cast enclosures
08 November, 2010 | Supplied by: Hammond Electronics Pty Ltd
The 1550Z die-cast enclosures are thick-wall (3 to 4 mm) IP66-sealed boxes for use in applications where impact protection and environmental sealing are required. The 18 sizes range from 50 x 45 x 30 mm to 223 x 147 x 83 mm, and are supplied in either a natural smooth ‘vibra’ finish or a tough, black polyester powder-coated finish.
FEAS SNT230-K switchmode power supply series
08 November, 2010 | Supplied by: Automated Control Pty Ltd
The FEAS SNT230-K series switchmode power supplies are robust devices to power sensitive loads in harsh industrial environments. The devices feature modern construction with high RF shielding and high reliability integrated into a functional and stable casing.
Eaton Intelligent Power Protector shutdown application
08 November, 2010 | Supplied by: Eaton Corporation
The shutdown application known as Intelligent Power Protector (IPP) provides controlled, graceful shutdown of computers and servers powered by a UPS in the event of an extended power outage. Graceful shutdown allows work in progress to be saved and data to be preserved, thus avoiding data loss and file system corruption.
Tyco Electronics Solklip grounding products
08 November, 2010 | Supplied by: Soanar Limited
Tyco Electronics has expanded its line of Solarlok photovoltaic (PV) interconnect products with Solklip grounding products. The electrical and mechanical properties are UL compliant for PV module grounding applications.
Belden BE43769 ethernet data cable
08 November, 2010 | Supplied by: Belden Australia Pty Ltd
The BE43769 ethernet data cable for railway and mass-transit applications is a halogen-free category 5e cable that is claimed to reliably provide real-time information for operators and passengers, onboard as well as in terminals and control rooms.
Clipsal 450 VC corrugated surfaces mounting block
08 November, 2010 | Supplied by: Schneider Electric
The Clipsal 450 VC mounting block for corrugated wall structures adapts the company’s Weathershield GPOs and typical 84 mm switches and sockets directly onto vertical corrugated wall cladding.
Cirprotec hardwired CPS Nano transient surge diverters
08 November, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Cirprotec hardwired CPS Nano transient surge diverters use multi-discharge system technology and voltage and projection status indication LEDs and are wall or flush mounted.
Conservelec Sun Power Light Saver energy-saving device
08 November, 2010 | Supplied by: Conservelec Pty Ltd
The Sun Power Light Saver energy-saving device, when installed on the light circuit, adjusts optimal voltage for each lamp according to electricity supply conditions enabling a reduction in electricity consumption of a claimed 20%+. It is suitable for all fluorescent lights and high-intensity discharge lamps.
Unex cable tray and trunking range
08 November, 2010 | Supplied by: Unex
The Unex range of cable trays is suitable for supporting insulated electric cables in commercial and industrial applications and other cable management needs, where insulation and requirements for low-smoke, halogen-free, fire-retardant properties are required.
Western Telematic PTS-9CM20-2 automatic power transfer switch
08 November, 2010 | Supplied by: Interworld Electronics and Computer Industries
The PTS-9CM20-2 automatic power transfer switch manufactured by Western Telematic is designed to provide safe, reliable power fall-back for single-corded rackmount equipment.
Project: Environmentally friendly electrical installation
05 November, 2010 | Supplied by: Albatech Pty Ltd
The ANZ Bank’s new head office in Melbourne’s Docklands precinct is Australia’s largest single-tenant office building, providing 87,000 m2 of floor space that accommodates some 6500 staff.
AMP NetConnect XG LAN cabling technology system
21 October, 2010 | Supplied by: Commscope
The AMP NetConnect XG LAN cabling technology system provides users with a next-generation network infrastructure to support 10 gigabit over both copper and fibre media. It comprises cable, connectors, termination closures and patch cords.
Will PVC in electrical products ever be considered ‘non-compliant’?
07 October, 2010 by Paul Stathis
According to Wikipedia, polyvinyl chloride - commonly abbreviated as PVC - is the third-most widely produced plastic in the world, after polyethylene and polypropylene. It is widely used in construction because it’s cheap, durable and easy to assemble. The annual global production of PVC is expected to exceed 40 million tonnes by 2016. In spite of its ubiquity, there is mounting pressure to ban it.