Spirent Communications SPT-9000A TestCenter
01 April, 2011 | TechRentals
Available to rent, the Spirent Communications SPT-9000A TestCenter is a network performance analysis system with both software and hardware components that condense the testing process and increase productivity for 10 Mbps to 100 Gbps networks.
Fluke DTX-MFM2 multimode fibre adapter
01 April, 2011 | TechRentals
Available to rent, the Fluke DTX-MFM2 multimode fibre module serves as an adapter for the Fluke DTX cable analyser. It measures optical power loss, length and propagation delay for multimode fibres when testing fibre installations in local area networks and data centres.
ERICO MP1WWM within-wall mounting plate
30 March, 2011 | nVent Australia
The MP1WWM within-wall mounting plate can be used for installing low-voltage cable, phone and data lines on plasterboard or drywall.
ERICO TSGB telescopic screw gun bracket
29 March, 2011 | nVent Australia
The TSGB telescopic screw gun bracket, part of the Caddy line of fixings, fasteners and supports, features a one-piece, break-apart design. It is suitable for lighter-duty applications and makes mounting multiple runs of pipe, conduit or electrical boxes easier. The pilot holes allow precise mounting anywhere between wall studs, not just by the wall stud.
IECI RSM-8Rx series console management switch with remote power reboot
28 March, 2011 | Interworld Electronics and Computer Industries
The RSM-8Rx series console management switch provides secure remote access to RS232 console ports and the ability to power cycle remote IT equipment. Two models are available: RSM-8R4 providing eight RJ45 serial ports and four IEC reboot power outlets, and RSM-8R8 that provides eight RJ45 serial ports and eight reboot power outlets.
Eaton 3S UPS
27 March, 2011 | Eaton Corporation
The 3S UPS is designed for small office and point-of-sale applications. An all-in-one UPS, surge suppressor and power board, it can save up to a claimed 30% of power consumed by idle peripherals. It provides plug-and-play power and surge protection to computers, gaming consoles and audio-video equipment.
Yamasaki TP40 FiberSeek PON fibre-optic power meter
26 March, 2011 | Anderson Corporation Pty Ltd
The Yamasaki TP40 FiberSeek PON fibre-optic power meter for testing in the FTTx environment simultaneously measures the PON signals of 1310, 1490, 1550 nm with 1310 nm wavelength upstream burst mode for communication with the ONT. For the fibre-to-the-home, it uses the signal pass through for minimal disruption for customers.
Yamasaki MEC mechanical splice
25 March, 2011 | Anderson Corporation Pty Ltd
The Yamasaki MEC mechanical splice is designed to stably connect and repair two fibre-optic cables. It allows shorter installation time, versatility and low optical loss and is suitable for quick fibre-optic connections out in the field during installation or repairs.
FLIR E60 infrared thermal image camera
25 March, 2011 | TechRentals
Available to rent, the FLIR E60 infrared user-friendly thermal image camera can locate issues with electrical equipment, identify faults in circuits and aid in research and development or predictive maintenance identification.
FLIR i3 infrared camera
20 March, 2011 | Teledyne FLIR
The i3 infrared camera is pocket sized and multipurpose for building and electrical inspections.
BTicino Swing + Sfera black and white video door entry kit
16 March, 2011 | Legrand Australia P/L
The BTicino Swing + Sfera black and white video door entry kit is inclusive of all necessary components to complete an installation for a single family home. It includes a Swing handset and a Sfera street panel.
Turck CAT6 RJ45 field-wireable connectors
16 March, 2011 | Turck Australia Pty Ltd
The category 6 RJ45 field-wireable connectors provide a simple and secure way to extend an ethernet cable in the field. Whether connecting a peripheral device, repairing/replacing a cable link or extending the network cable, the field wireable allows an on-site assembly with no special tools for up to 10 Gigabit Ethernet networks.
Siemon category 6A Z-Max solid cords
16 March, 2011 | Siemon Australia
The category 6A Z-Max solid cords can be used in high-performance consolidation points and cross connects as an equipment cord.
Anderson RapidConnect field-installable connectors
08 March, 2011 | Anderson Corporation Pty Ltd
The RapidConnect field-installable connectors for field installations help save time by reducing the need for termination equipment or messy epoxy and accelerator.
Yokogawa CA450 process multimeter/calibration instrument
08 March, 2011 | Yokogawa Australia Pty Ltd
The Yokogawa CA450 process multimeter is an on-site measuring instrument that provides the functionality of a digital multimeter for basic measurements such as voltage, current and resistance, and also acts as a calibrator for electrical and process measurements.
