VeEX -RXT-6200 100G Universal Module

Sunday, 01 April, 2018 | Supplied by: TelecomTest Solutions


1. rxt6200  1200 modular test platform  282 29

The VeEX -RXT-6200 100G Universal Module is equipped with dual next-generation optical transceiver ports and optional legacy test interfaces. It complements the RXT Platform, extending its testing range to 100 Gbps and offering up to two independent tests.

Installation, commissioning, monitoring and maintenance tasks are simplified thanks to a combination of intuitive features and powerful test functions. Novice users benefit from the easy-to-use GUI, while experienced users will appreciate an array of advanced features such as OTL/PCS, CAUI-4/XLAUI Lane BERT, overhead monitor/control, tandem connection monitoring, service disruption, protocol capture/decode, BERT and throughput test.

Module highlights include independent dual-port testing, up to 2 x 112G; CFP4 (LR4 & SR4) and QSFP28 interfaces for 100GE, OTU4 and 50GE applications; supports IEEE 802.3bj Clause 91 RS-FEC as required for SR4; QSFP+ for 40GE, OTU3; SFP28 interface for 25GE, 16G FC, 32G FC and 24G CPRI applications; SFP+ for 100Base-FX, 1000Base-X, 10GEBase-X, OTU2/2e/1e/1, STM-64/16/4/1/0, OC192/48/12/3/1, and fibre channel 1/2/4/8/10/16G and CPRI up to 12G applications; RJ45 for 10/100/1000Base-T applications; external clock interfaces; and 150 ppm clock offset generation.

Ethernet testing features include optical 100 Mbps to 100 Gbps Ethernet testing, including 25GE and 50GE; electrical 10/100/1000 Mbps Ethernet testing; dual-port testing capabilities; optical Lane BERT and CAUI-4/XLAUI Lane BERT; PCS Layer Testing with Skew generation/monitoring; multi-stream testing up to 32 independent streams; IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, and MPLS-TP OAM support; RS-FEC support for SR4 and SR10 transceivers; Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB, EoE support; MAC flooding; RFC2544 and V-SAM (Y.1564) testing; IPv4 and IPv6 traffic generation; BERT and throughput testing at Layer 2 and Layer 3; smart Loopback mode for Layer 2 and Layer 3; one-way-delay latency measurement (GPS assisted); line rate packet capture with Wireshark decode; and error and alarm injection.

Online: www.telecomtest.com.au
Phone: 03 8618 6922
Related Products

Ideal Networks SecuriTEST IP CCTV tester

Ideal Networks SecuriTEST IP tester allows technicians to install, test, troubleshoot and...

Rapid Test Systems RCD testing device

NHP has partnered with Rapid Test Systems to bring RCD testing device Rapid Test to the local...

AFL FOCIS Duel fibre-optic connector inspection system

The AFL FOCIS Duel fibre-optic connector inspection system is a solution for optical network...


  • All content Copyright © 2018 Westwick-Farrow Pty Ltd