SOLEXY BXF and BAF series of ethernet barriers
The SOLEXY BXF and BAF series of ethernet barriers allow transmission of ethernet into hazardous areas by incorporating an intrinsically safe barrier circuit and a seal-off fitting into a single package.
The BXF series of ethernet couplers for use in hazardous areas includes an explosion-proof housing without the need of a seal fitting, taking up no internal space. The BAF series of ethernet couplers includes aluminium housing with gasket, suitable for use in purged panels and other non-hazardous areas. They can also be remote mounted up to 70 m away with minimal loss of signal.
A BXF and BAF coupler is required on each end of a cable installation for full protection of both the RX and TX lines.
Both series are designed for 10/100 ethernet signals and operate with Cat5e cable. The products are available with UL, ATEX, IECEx or MSHA certifications.
Phone: 02 8756 4223
Vertiv SmartRun data centre infrastructure system
This system is designed to integrate power distribution busbar, liquid cooling piping network,...
STULZ CyberRack Active Rear Door
The updated CyberRack Active Rear Door is a space-saving, rear-mounted heat exchanger with...
MSA Safety FieldServer ProtoNode Gateway
The gateways are designed to be versatile, cybersecure, easy-to-configure devices that serve as...
