Milliamp clamp meters
26 October, 2009 byThe Fluke 772 and 773 milliamp clamp meters are designed to measure 4-20 mA signals without ‘breaking the loop’, enabling technicians to measure low-level DC current in PLCs and control systems, correlate process indication with real physical value and save process downtime.
Three-phase transformer tester
24 September, 2009Megger's TTR 310 Three-Phase Transformer Turns Ratio Test Set is designed to measure the turns ratio of power, instrument and distribution transformers in a substation or manufacturing environment.
CM605 multifunction clamp-on meter
31 August, 2009The CM605 multifunction clamp-on meter is designed for measuring 420 mA process signals, as well as the higher currents (up to 100 A) associated with general electrical and industrial monitoring and troubleshooting.
Digital ohmmeter
01 August, 2009The Megger DLRO 10X Microhmmeter has been introduced into TechRentals’ rental fleet.
Handheld digital multimeter
09 July, 2009 byThe TY700 series of handheld digital multimeters features a basic accuracy of 0.020% and 50,000 count dual display with a 51-segment bar graph, true RMS measurement and simultaneous measurement and display of DC and AC, closed-case calibration, and data management support via logging-mode memory, logging software and IR USB communication.
MIT30 high-voltage insulation tester
09 July, 2009The MIT30 high-voltage insulation tester is housed in a rugged case (IP67 rated when closed and IP52 rated when in use), designed for field use in acceptance and maintenance testing of switchgear and transformers.
Testing lightning arrestors
09 July, 2009The handheld Megger DET20C ground resistance clamp tester can be used to test lightning arrestors to verify their condition to successfully dissipate the energy from a lightning strike.
Universal high-voltage insulation dielectrics test set
09 July, 2009The HVA 60 universal high-voltage insulation dielectrics test set is capable of finding weak cables by deploying a variable frequency VLF output.
Universal relay tester
08 July, 2009 byThe Ponovo T200A Universal Tester is suitable for testing various types of protection relays including instantaneous, extreme inverse, inverse, electrodynamic and numerical relays such as distance, impedance, directional ground, differential, power flow, frequency and power factor.
Reporting software for digital multimeters
08 July, 2009 byThe enhanced Version 3.4 of FlukeView Forms provides analysis and reporting software for digital multimeters and other test instruments.
Kyoritsu digital multimeter range
08 July, 2009The Kyoritsu digital multimeter range comprises four models: 1051, 1052, 1061 and 1062 and features colour-coded range selection switches and function buttons for ease of use.
Clamp meters
08 July, 2009The EX600 series of true RMS clamp meters features an IR thermometer for locating hot spots and NCV, making it an all-in-one solution for both electrical and HVAC professionals.
Buyer's guide to test and measurement equipment
04 June, 2009 by Celemetrix AustraliaThis guide is designed to assist you in selecting and deciding on investment criteria for your test and measurement equipment.
Earth ground tester kit
27 May, 2009The Fluke 1625/1623 earth ground testers can perform all four types of earth ground measurement.
Voluntary recall of Fluke digital clamp meters
14 May, 2009Fluke is voluntarily recalling a number of its digital clamp meters that have the potential to display incorrect electrical circuit status details.
