Meanwell waterproof LED drivers
19 December, 2011 | Supplied by: ADM Instrument Engineering GroupThe 100(H)W, 120(H)W, 150(H)W and 185(H)W waterproof LED drivers are now available in 12 VDC and 24 VDC output, each unit being supplied with a 1.8 m SAA cable and 3-pin Australian plug for easier use.
Belden MIPP modular industrial patch panel
15 December, 2011 | Supplied by: Belden Australia Pty LtdThe MIPP is a termination panel for cables that need to be connected to active equipment such as switches, industrial ethernet devices and any other device with an ethernet link.
Rockwell Automation Allen-Bradley PowerFlex 755 AC drives
14 December, 2011 | Supplied by: Rockwell Automation AustraliaRockwell Automation has extended the power range of its Allen-Bradley PowerFlex 755 AC drives to 900 kW and added 690 V ratings.
Keystone Electronics automotive blade fuse clips
13 December, 2011 | Supplied by: NPA Pty LtdKeystone Electronics has available a wide selection of surface-mount, automotive blade fuse clips that are engineered to secure fuses in place even after multiple insertions. They are suitable for high-density applications and are available in vertical, horizontal and through-board blade entry types.
SF6 gas recycling centre to lower carbon emissions and generate cost savings
12 December, 2011 | Supplied by: ABB Australia Pty LtdSF6 gas is extensively used in the electrical industry for dielectric insulation and current interruption in circuit breakers, switchgear and other electrical equipment. Using recycled SF6 gas will help reduce carbon emissions and could result in a cost-saving potential of up to 30%.
RF Industries One Tape Pro
12 December, 2011 | Supplied by: RFI Technology SolutionsOne Tape Pro is a self-fusing UV-resistant silicon repair tape with no adhesive.
Weidmuller Cabinet Line Cat6A shielded ethernet patch cables
12 December, 2011 | Supplied by: Weidmuller Pty LtdThe Cat6A shielded ethernet patch cables are suitable for use in industrial and manufacturing environments or where electrical noise is present.
RF Industries Panduit MEHT187 portable embossing tool
12 December, 2011 | Supplied by: RFI Technology SolutionsThe Panduit MEHT187 portable embossing tool features a multifunctional cutting die design that creates embossed marker plates with a raised cable tie slot in one step instead of three.
The power of copper
29 November, 2011 | Supplied by: NHP Electrical Engineering Products Pty Ltd
Man first came to understand the value of copper around 10,000 BC. The Romans, Greeks, Aztecs and Egyptians were quite innovative in their use of copper and copper-tin alloys such as bronze and brass. The metal was readily accessible, very ductile and malleable, making it relatively easy to smelt. It also had a natural resistance to corrosion. The current extraordinary rate of development in China and India has significantly increased the demand on this resource, driving the cost of copper to record levels. As the lifeblood of all electrical systems, it is essential that designers and engineers are efficient in their use of copper to produce an economical solution without jeopardising the integrity of the electrical supply system.
Banner Engineering K50L Ez-Light indicator light
23 November, 2011 | Supplied by: Micromax Pty Ltd
The Banner Engineering K50L sealed audible Ez-Light is a rugged, easy-to-install indicator light with an audible alarm, which allows it to be easily seen and heard from a distance. Featuring a fully sealed body, rated IP67 or IP69K depending on the model, the light is suitable for use in the food and beverage industry, processing lines, car washes and areas prone to high levels of moisture. Additionally, with a wide, 12-30 VDC operating range, the light is suitable for use in mobile equipment.
Energy-efficient cooling system for electrical cabinets
23 November, 2011 | Supplied by: Seifert mtm Systems Australia Pty Ltd
Seifert mtm Systems' second-generation models of the ecool series with speed-controlled compressors offer temperature stability for less component stress.
Cincon CFM101S high-density/high-efficiency switching power supply range
21 November, 2011 | Supplied by: Powerbox Australia Pty Ltd
The Cincon CFM101S series of high-density/high-efficiency switching power supplies is available in a compact open-frame package with active power factor correction and convection cooled operation.
Wago Cage Clamp S rail-mounted quadruple deck terminal block range
18 November, 2011 | Supplied by: NHP Electrical Engineering Products Pty Ltd
Wago’s range of multipurpose, Cage Clamp S rail-mounted quadruple deck terminal blocks can be used for connecting electric devices from motors to sensors and allows for a set of terminals to supply power to a number of motors or three-wire sensors.
Linear Technology LT1431 three-terminal adjustable shunt voltage regulator
16 November, 2011 | Supplied by: element14
Linear Technology has released a high-reliability, MP-grade version of the LT1431, a three-terminal adjustable shunt voltage regulator that operates over a -55 to 150°C junction temperature range.
Connector-Tech ALS D38999 Series III circular connectors
15 November, 2011 | Supplied by: Connector-Tech ALS Pty Ltd
The D38999 Series III circular connectors feature high contact density for space and weight savings. The connectors are environmentally sealed and utilise removable crimp contacts.