Industrial Labelling Solutions terminal block markers
22 April, 2010 byThe Industrial Labelling Solutions range of terminal block markers helps to identify cable termination points quickly and safely.
Industrial Labelling Solutions stainless steel cable markers
16 April, 2010 byThe Industrial Labelling Solutions stainless steel cable markers are designed for permanent identification of wires and cables in harsh industrial environments and where cables have prolonged exposure to UV radiation.
Sunlec Grafoprint G117 mobile cable and wire marking kit
15 April, 2010 byThe Grafoprint G117 mobile cable and wire marking kit is a cost-effective and productive alternative to traditional cable marking systems with no more wastage, missed alignments or clarity issues.
Brady Australia BMP21 portable label printer
15 April, 2010 byThe BMP21 portable label printer offers one-handed operation, bar coding, large display screen and dual label-cutter with label retention.
Anderson Power Products APP 1x4 auxiliary connector
15 April, 2010 byThe Anderson Power Products APP 1x4 auxiliary connector is designed to mount into standard Anderson SBE160/320 and SBX175/350 connector housings, where the four circuits support the transmission of battery status, charge and discharge information for traction battery, fast-charge and opportunity-charge applications such as in UPS and materials handling systems.
LTW Circular II Metal Waterproof Connectors
15 April, 2010The LTW Circular II Metal Waterproof Connectors are IP68 rated for data, signal, control and power installations in industrial automation applications.
The benefits of composite materials in connectors
10 March, 2010The selection of electrical and electronic connectors should be made with a full knowledge of the application and the suitability of the available materials.
ITT Veam Power lock connectors
19 February, 2010 byThe ITT Veam Power lock series of connectors for high-power three-phase power applications such as lighting, generators and load banks.
Turck D-Size powerfast modular wiring system
19 February, 2010 byThe D-Size powerfast modular wiring system is designed to handle high current applications for machine power distribution and motor control. The complete D-Size power distribution system includes 3- and 4-pin cordsets, receptacles and tees that provide up to 600 V and 30 A. Additional components include field wireables, closure caps and a tee with an integrated cable drop eliminating the need for two separate connectors.
Maser supplies cable to Queensland power station
19 February, 2010Maser has successfully completed the supply of instrumentation, control and thermocouple cables required for a 630 MW gas-fired power station construction in Queensland’s Darling Downs region near Braemar, 40 km west of Dalby.
TransGrid completes $147 million transmission line project
15 February, 2010In March 2010, TransGrid will energise its new 115 km, 330 kV transmission-line project in the NSW Central West, to increase the reliability of supply to residents and businesses.
Rackpower C13 to C20 IEC cordset
11 February, 2010Rackpower's C13 to C20 IEC cordset is available in 1, 2 or 4 m sizes.
AMP NETCONNECT Sigma-Link copper cabling system
04 February, 2010The AMP NETCONNECT Sigma-Link is a pre-terminated and easy to install copper cabling system.
Maser armoured cables
01 February, 2010Maser supplies armoured cable solutions to harsh cable environments that extend past the instrumentation level and can offer an armoured solution for a wide variety of applications.
Alpha Wire XtraGuard high-performance electronic cables
01 February, 2010Alpha Wire XtraGuard is a range of high-performance electronic cables for critical applications.
