Fluke T6 Electrical Testers with FieldSense technology

Thursday, 05 October, 2017 | Supplied by: Fluke Australia Pty Ltd



The Fluke T6 Electrical Testers with FieldSense technology allow electricians to measure, not just detect, voltage and current without test leads.

The testers make it possible to take reliable true-rms measurements in crowded junction boxes or along conductors with inaccessible end points, saving time, minimising potential errors and reducing the possibility of arc flash.

Other features of the Fluke T6-600 and T6-1000 testers include: measure voltage up to 1000 V through the open fork without test leads or exposed conductors; with no need to open panels or remove wire nuts, electricians can speed through troubleshooting; simultaneously measure and display voltage and current on the T6-1000. The T6-1000 also measures resistance up to 100.0 kΩ; the T6 testers measure 4/0 wires with current up to 200 A.

The FieldSense technology enables the testers to give simultaneous, reliable voltage and current readings, not just simple go/no-go voltage detection. The rugged testers are 1000 V CAT III, 600 V CAT IV safety rated (600 V CAT III for the T6-600 model) and feature an easy-to-read display with a backlight.

Online: www.fluke.com.au
Phone: 02 8850 3333
Related Products

Fluke T6 Electrical Testers with FieldSense technology

The Fluke T6 Electrical Testers with FieldSense technology allow electricians to measure, not...

Carlo Gavazzi EM24DIN NMI pattern approved energy meter

The Carlo Gavazzi EM24DIN NMI pattern approved energy meter from NHP is suitable for embedded...

Sonel-MIC-5001 5 kV insulation tester

The Sonel-MIC-5001 5 kV insulation tester weighs 0.9 kg, tests voltages from 50 V to 5 kV and...


  • All content Copyright © 2017 Westwick-Farrow Pty Ltd